Haier HLF103Q User Manual page 11

Timed Dry cycle
1, Press any button except "Off" button to power on
2, Press "Timed-Dry Cycles" button and select "Timed Dry" cycle
After powering on, press "Timed-Dry Cycle" button to select "Timed Dry" program.
3, Press "More Time" And "LessTime" buttons to set a suitable time
* After setting "Timed-Dry Cycle" to "Timed Dry", you can press these two buttons to
increase or decrease drying time as you desires.
4-6, Press buttons "Temp", "Cycle Signal", "Wrinkle saver", and "Touch
Up" to define your desired program
o Notes: For "Timed Dry" program, use of buttons "Temp", "Cycle Signal", "Wrinkle
Saver" and "Touch Up" is the same as for auto-programs. "Sensor Dryness Level" is
here inactive, pressing of which will get alarms.
7, Press "Start/Pause" button
10