Horizon Fitness E54HR User Manual page 10

E51/E52 ASSEMBLY STEPS
STEP 1:
ATTACH FRONT TUBE.
Note: Make sure not to tighten
bolts until all assembly steps have
been completely assembled and
aligned.
STEP 4:
ATTACH LEFT & RIGHT UPPER
HANDLE BARS TO CONSOLE
MAST.
Note: Bolts and washers are pre-
assembled.
H
STEP 7:
ATTACH LEFT & RIGHT LOWER
HANDLE BAR/LINK ARM TO
UPPER LEFT & RIGHT HANDLE
BARS. ATTACH H-BAR COVERS.
STEP 2:
ATTACH LEFT & RIGHT GUIDE
RAILS.
E
G
STEP 5:
ATTACH LEFT & RIGHT PEDAL
ARMS AND PEDAL ARM
SLEEVES. Note: Black 'Teflon'
surface of J should be facing the
pedal arm.
Jf
/
/
\
STEP 8:(E51 model only)
ATTACH TENSION KNOB
10
o
STEP 3:
ATTACH CONSOLE MAST AND
CONSOLE MAST BOOT.
Note: Make sure to loosen the
water bottle screws in order to fit
the console cable through the
mast, DO NOT PINCH WIRES!
R S
STEP 6:
ATTACH LEFT & RIGHT LOWER
LINK ARM TO PEDAL ARM.
Note: Wheel cover included with
E52 model only.
STEP 9:
ATTACH CONSOLE AND CON-
NECT ALL WIRES.
Note: DO NOT PINCH WIRES!
Note: Bolts are pre-assembled to
console.