FujiFilm FINEPIX XP50 Series Owner's Manual page 12

_>_x}(:it_ct _@u_Lires _(i _ec_tio_s _o_ Use
• After Use
']) Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign mat-
ter could damage the seal, lowering water resistance.
';!) After using the camera underwater or in locations where foreign matter might adhere to the
camera body, rinse the camera under the tap or leave it in a basin of fresh water for two to
three minutes.
';!) Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should
never be used.
';!) After use, remove water droplets and foreign matter with a dry cloth, firmly latch the battery-
chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera
thoroughly after removing it from the water.
• Storage and Maintenane
':!) Do not store at temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
';!) To ensure continued water resistance, it is recommended that you have the water-resistant
seal replaced about once a year (a fee is charged for this service). Contact your retailer or a
FUJIFILM-authorized repair technician for more information.
• ColdClimates
';!) Battery performance drops at low temperatures, reducing the number of pictures that cars be
taken. Insulate the camera to keep it warm or place it in your clothing.
':!) Use an NP-45A battery.
';!) Display response may slow at low temperatures.This is not a malfunction.