Carpet Height Adjustment - Hoover UH40155 Owner's Manual

Polarized
plug
To reduce the risk
of electric shock,
this appliance has
a polarized ptug
[one blade is wider
than the other).
This plug will fit in
a polarized outlet
on}y one way.
lithe plug does
not fit fully in the
outlet, reverse the
plug. If it still does
not fit, contact a
qualified electrician
to install the proper
outlet. Do not
change the plug in
any way.
On-Off
switch
Plug cord into elec-
trical outlet.
To turn cleaner
ON, push switch
(A) toward front of
cleaner.
To turn cleaner
OFF, push toward
back of cleaner.
Handle positions
The handle of your
cleaner has three po-
sitions; upright when
using cleaning tools;
operating position for
general operation on
carpet and floors; low
for reaching under
low furniture. Step on
handle release pedal
to lower handle.
Transporting
cleaner
Put handle in up-
right position. Tilt
cleaner back on rear
wheels. Push
forward.
Carrying
handle
Use the carrying
handle to lift the
cleaner.
Carpet height
adjustment
The cleaning of carpet
and rugs takes place at
the nozzle (A).
When it is necessary
to raise and lower the
nozzle for various car-
pet pile heights, turn
the carpet height ad-
justment knob (B) to
the desired setting.
For ease inturning
the knob, place handle
in upright position
and tilt cleaner back
slightly.
Settings
For maximum cleaning performance,
the following carpet height settings are recommended.
• Low setting: for all types of carpet and hard floors.
Note: If the cleaner is difficult to push, rotate knob to the next higher
setting.
• Medium and High settings: for deeper pile carpet where easier
pushing effort is desired, while maintaining good cleaning perfor-
mance.