Rear Speaker Terminal Connections For 35Ux60B - Hitachi 35UX60B Operating Manual

REAR SPEAKER TERMINAL CONNECTIONS FOR 35UX60B
,nect after turning the power of the "IV "OFF".
;s the RightSpeaker red buttonand insertthe positive(+)lead wire intothe hole belowthebutton.When The button
leased,thewire islockedintoplace.Inthe same manner,pressthe RightSpeaker blackbutton and insertthe negative
._ad wire. Repeat this procedurefor the Left Speaker.
TO
EXTERNAL <_
SPEAKER
DOLBY SPEAKERS i INT./EXT. SPEAKERS
® ®
Dolby SurroundExternalConnection
This is used for DOLBY Surround,sound signalis always "ON".
INT./EXT. SPEAKER CONNECTION
This is controlled by the remote transmitter thru the on screen display. It can be turned "ON" or"OFF" with the INT./
EXT. switch that could be set to factory built in Internal speaker or to an optional Exl. Speaker.
'_CAUTION:
Do not connectSpeakerssimultaneously to the REAR SPEAKER terminalof the Color TV and
anexternalamplifier. T hiscoulddamage boththeTV and the speakers. Your TV was designed
to use 8 Ohm speakers only. Any other type may degrade the audio performance of your
entertainmentsystem.
HITACHI COLOR TV SPEAKER AMPLIFIER
PS ON REAR PANEL CONNECTIONS
S-Video connection is provided for high performancelaser discs, VCR's, etc., that have this feature. Use this
nectionin place of the standard videoconnectionif yourdevice has this feature.
_ur device has onlyone audio output(monosound),connectitto the left audiojack on the TV.
er to the operatingguide of yourother electronicequipmentfor additionalinformation on connectingyour hook-up
les.
;ingleVCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own videoor line output
=UT: 1 in the example on p. 17). Refer to your VCR operatingguide for more informationon "line" input-output
nections.
22