Hitachi 35UX60B Operating Manual page 59

AUDIO
INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a separate
stereo system. This feature is used to turn the internal speakers "ON" or "OFF", when the Receiver is connected to an
External Audio Amplifier. This function allow the user to tum offthe TV speakers. Therefore, no sound will be emitted from
them. This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a
separate stereo system.
Forexternalspeaker with Internal/External s witch,sound reproduction is as follows. (For 35UX60B Only.)
TELEVISION ON SCREEN DISPLAY AND REAR SPEAKER CONNECTION
(_ On Screen DisplayInt. Speaker: "ON" ..and-
Rear Switchto Int.: InternalSpeaker is =ON" -or-
Rear Switchto EXt.: ConnectExt. Speaker first or no soundwill be heard. Externalspeaker in "ON'.
MTS:MONO SAP STEREO
DYNAMIC BASS.ON OFF
LOUDNESS: ON OFF
INT.SPEAKERS: ON OFF
ENTER MENU
(SET) (EXIT)
* DOLBY SURROUND
INTJEXT. SPEAKERS
I
* Dolby surround J When switch to
for 35UX60B is [ Int., "built in" always "ON'. speaker is "ON'.
MTS:MONO SAP STEREO
DYNAMIC BASS.ON OFF
LOUDNESS: ON OFF
INT.SPEAKERS: ON OFF
<1_ ENTER MENU
(SET) (EXIT)
* DOLBY SURROUND INTJEXT. SPEAKERS
B_ ONLY
INT.
I1_1 Ex'r
" Dolby surround J When switch to
for 35UX60B is I Ext. - connect an always "ON". Ext. speaker first
or no sound will
be heard. Ext.
speaker is "ON".
59