Rear Panel Jacks; Tips On Rear Panel Connections - Hitachi 31Cx5B Operating Manual

REAR PANEL JACKS
©
O
VHF/UHF
AUDIO to HI-FI OUfPUI f_3)
TERMINALS
-- INPUT TERMINALS O
VIOEO
O1¢
AUDIO AUDIO I
Q VHF/UHF ANTENNA TERMINAL
O s-VIDEO INPUT
Antenna Inputs
The VHF/UHF terminal can be used for normal TV, cable "IV (CATV), a TV game, etc.
®
Audio/Video Inputs 1, 2
The "AVX" (Auxiliary video) button will step through each video source and the current antenna input each time it
is pressed. Use the audio and video inputs to connect external devices, such as VCR's, camcorders, laser disc
players, video games, etc.
@
Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo system amplifier. With this connection, the audio to
the stereo can be controlled by the television's remote control. Use these jacks for the SURROUND Left and Right
channels. (See page 19 and 22.)
S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance laser discs, VCR's, etc., that have this feature. Use this
connection in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up
cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 1 in the example on p. 18). Refer to your VCR operating guide for more information on "line" input-output
connections.
16