Hitachi P50S601 Operating Manual page 51

Set Event Timer
This function will automatically operate the Plasma TV
viewing reservation of a program. If the clock is not set,
you can not use this function and the screen at right will
appear. The message on the screen will disappear after
3 seconds, then the screen automatically goes to the
clock setup mode (see page 49).
1. Use the CURSOR PAD A, • to highlight EVENT 1,
EVENT 2, EVENT 3, EVENT 4 and then press the
SELECT button to select.
2. Use the CURSOR PAD A,• to highlight and
select START TIME HOUR/MINUTE
3. Use the CURSOR PAD A,• to highlight and
select START TIME AM/PM.
4. Use the CURSOR PAD •, • or • to highlight and
select FINISH TIME HOUR/MINUTE
5. Use the CURSOR PAD •, • or • to highlight and
select FINISH TIME AM/PM.
6. Use the CURSOR PAD • to highlight the MONTH.
7,
Use the CURSOR PAD • to select a MONTH or
CURSOR PAD • to select DAILY, WEEKLY -
SUNDAY TO MONDAY. Use the CURSOR PAD _1
to return to MONTH.
8. Use the CURSOR PAD •, • or • to highlight and
select the DAY of the MONTH.
9. Use the CURSOR PAD •, • or • to highlight and
select the YEAR.
10. Use the CURSOR PAD •,• or • or NUMBER
buttons to set the channel the TV will tune into.
11. A _ in the box means the Event is enabled.
5!