Hitachi P50S601 Operating Manual page 41

Select CHANNEL MANAGER to setyourAntenna
options, runAuto Channel Scan, Check S ignal Meter
and Set C hannel List.
1.Press C URSOR PAD
A,V to highlight functions.
2. Press the SELECT button or CURSOR PAD • to
select.
Signal Meter
Select SIGNAL METER when using an indoor or outdoor
antenna. This feature will show the signal strength and
peak values of the Antenna signal to help you adjust your
antenna to optimize signal reception.
Use the CURSOR PADS and the SELECT button to
highlight and select CLOSE to exit.
Auto Channel Scan
This feature will automatically store active Analog and
Digital channels in Auto Channel Scan memory.
1. Use the CURSOR buttons < or • to highlight AIR,
CABLE (1) or CABLE(2) source.
2. Press the CURSOR buttons < or • to highlight the
START or RESET option.
3. Press the SELECT button to select.
41