Hitachi P50S601 Operating Manual page 36

Select VIDEO toadjust picture s ettings andimprove
picture quality. You can independently customize each o f
the Video I nputs toyour p reference toincrease viewing
performance andpleasure depending upon thevideo
program being v iewed. If RESET i sselected, only the
selected input willreset toinitial conditions.
Picture Mode
Use this function to choose from automatic picture
settings to optimize your TV's performance.
1. Use the CURSOR buttons _1 or I_ to highlight and
select PICTURE MODE settings (Day-Normal,
Day-Dynamic or Night).
2. Then press the SELECT button to set the mode and
return to the Video menu or press EXIT to quit menu.
3. There are 3 Picture Modes available for the customer
Day (Dynamic) , Day (Normal) and Night mode.
Day (Dynamic) is the original factory preset mode, this
can be changed by adjusting any video setting to your
desire conditions. Day ( Normal ) can be used as a
second video setting for daytime viewing. Night is set
to watch programing during nigthtime.
1,
2.
3.
4.
5.
Use the CURSOR PAD • or • to highlight the function to be adjusted.
Press the SELECT button or the CURSOR PAD I_ to select the function settings.
Press the CURSOR PAD _1 or I_ to adjust the function.
Press MENU to return to main menu.
Press EXIT to quit menu.
Contrast
Use this function to change the contrast between black
and white levels in the picture.
Brightness
Use this function to adjust overall picture brightness.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear
natural.
Sharpness
Use this function to adjust the amount of fine detail in the
picture.
36