REMOTE CONTROL
BATTERY INSTALLATION
AND
REPLACEMENT
1.
,
,
Open the battery cover of the remote transmitter by
pushing the notched part of the cover with your
fingers.
Insert new "AA" size batteries or equivalent for the
Remote. When replacing old batteries, push them
towards the springs and lift them out.
;
i
Match the (+) and (-) marks tn the battery comped-
ment.
4.
Replace the cover.
BOTTOM VIEW (CLU-414UI)
BOTTOM VIEW (CLU-316U)
CAUTIONS
1.
Ifyour television set is to remain unused for a long period oftime, forlnstance, when yougo on a vacation, unplug
the television set from the wall outlet.
2.
Do not subject the Remote Transmitter to shocks such as dropping it on the floor, etc. Precision parts may be
damaged.
3.
Do not allow the Remote Transmitter to become wet and avoid placing it in areas of high humidity. Don't leave
it on or near a heater. Excess heat or moisture may cause the unit to cease operation.
4.
If the batteries become exhausted, Remote Control operation may become erratic or stop altogether. Replace
the old batteries with fresh "AA" types.
NOTES
1.
3"he Channel No. Indication, Volume Indication and OFF TIMER Indication are not displayed simultaneously.
2.
3"o operate your TV, point the Remote Transmitter at the remote sensor of the TV.