Hitachi 27CX1B Operating Manual page 17

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING STEREO VCR OR STEREO VIDEO DISC PLAYER
1,
2,
3.
4.
5.
Connect the cable from the VIDEO OUT of the VCR or the Video Disc Player to the "INPUT (VIDEO)" jack on the
TV set. (Fig. 1)
Connect the cablefrom the AUDIO OUT "R" ofthe VCR or the Video Disc Player to the "INPUT(AUDIO/R)" jack.
(Fig. t)
Connect the cable from the AUDIO OUT "L" of the VCR or the Video Disc Player to the "INPUT(AUDIO/L)" jack.
(Fig. 1)
Press the INPUT(20SA5B/27CX1B) or AVX(27CX15B) button to view the program from the VCR or Video Disc
Player. The mode "VIDEO" disappears automatically after approximately 8 seconds.
Press the INPUT(20SA5B/27CX1 B) or AVX(27CX15B) button to return to the previous channel.
Video Cassette Recorder
NOTE:
TV INPUT
TERMINAL
INPUT
VIDEO I
©
(MONO)
AUDIO
VIDEO OUT AUDIO OUT
ITi
TERMINAL '
FIG. 1
V L R
OUTPUT
HITACHI MODEL VT-S751A
or similar model
BACK
OF VCR
Completely insert the connection cord plugs when connecting to REAR panel jacks. If you do not the
picture that is played back may be abnormal.
If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
17