Table of Contents
Advertisement
Supplied Accessories
Check
the supplied
accessories
before
installation.
In case of missing
or damaged,
please
contact
the dealer
immediately.
User Manual
Remote Control
Two AAA Batteries
Power Cord
Preparation
Remote control Batteries
Installation
1. Slide open the battery compartment cover in the direction of the arrow.
2.
Insert two AAA batteries.
Make sure the polarities match the indication
inside the battery compartment.
3.
Slide to close the battery compartment cover until it clicks.
CAUTION:
• Do not insert batteries with '+' and '-' polarities reversed as this may cause the batteries to swell or rupture resulting in leakage.
• Never mix used and new batteries in the device.
• Replace all the batteries in the device at the same time.
• Remove the batteries if the remote control is not going to be used for an extended period of time.
Using the remote control
Point the remote
control
directly
at your TV, within a 30 ° angle
horizontally
(15 ° to either
side),
and within
30 ° vertically
of the
remote
control
sensor
on the front of your TV and within
26.25
feet (8 m) of your TV.
T£:'
/15°t15 °_,
CAUTION:
• DO not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types.
• Objects between the remote control and the remote control sensor may block the remote control signal.
• The range of the remote control may be diminished
if direct sunlight or other strong light is shining on the remote control sensor. In this case,
change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor.
6
Advertisement
Table of Contents
