Installation In Minimum Width Window - HAMPTON BAY HBQ100 Installation & Operation Manual

2.
WINDOW INSTALLATION
D Plastic foamseal
iiiiiiiiirllllllll
Upper window sash
Lowerwindow sash
5/8" wood screws
.......... _: __:==;_ _= ,_...........
9. Cut plastic foam seal to width of window
and install between upper and lower window
sash (Fig. 9).
10, Use sealant to filI any minor openings.
Installation in
Minimum Width Window
1. Remove both filler panels from air
conditioner cabinet (Fig. 5).
2. Refer to steps 1 through 7 of preceding
instructions (Pgs. 2 & 3).
3. Close window until it touches behind air
conditioner top bar (Fig. 8).
4, Fasten lower window sash to window
frame (use finishing nails, wood screws,
or "L" brackets) (Fig. 9).
5. If filler is required on sides of air
conditioner, cut plastic foam sea[ to size
and fill both sides.
6, Cut plastic foam seal to width of window
and install between upper and Iower
window sash (Fig. 9).
7, Use sealant to fiII any minor openings.
Consult your authorized dealer or importer for
alternative instaIlation instructions.
Window sill Fillerpanel
INSIDE VIEW