Zenith VR4285HF Operating Manual & Warranty page 7

INSTALLATION/Step A
Audio/Video Connections (To TV A/V In Jacks)
VCR
Back Panel Typical "rv
/ J Back Panel
VIDEO L-AUDIO-R I _ VCR I-'l ----
_, I£ L kVIC EO
, \ ./! i ,_<v,<_o_ .,
D A (,v -
.
Note: You must make these additional connections to hear stereo sound while playing a tape
or using the VCR Tuner as the source of the TV picture. See Additional Irlformation.
Step 1. Connect VCR L-AUDIO-R OUT to Audio Right and Left In jacks on the "1_/or a stereo.
Step 2. Connect VCR VIDEO OUT to the Video In jack on the TV.
Accessories Audio/Video Connections (To VCR A/V In Jacks)
VCR
Back Panel
VIDEO L-AUDIO-R
_® ®ouT®
/VCR _/_ Accessory
i a) ,ane, _
;J
Accessory
Components:
Another VCR
Camcorder
Video Camera
Satellite Receiver
Laser Disk Player
Stereo Hi-Fi
Step 1. Connect Audio Right and Left Out Cables from an audio source, such a's another VCR, Camcor-
der, Satellite Receiver, Laser Disk Player or Stereo Hi-Fi, to the VCR L-AUDIO-I;', IN jacks.
Step 2. Connect Video Out from a video source to the VCR VIDEO IN jack.
Note: If you need adapters or additional audio/video cables to make the connections shown in this section,
they can be purchased from your nearest Sears Retail Store or Service Center.
._*:,-0>o 1 _ 3