Features - GE Spacemaker DSXH43 Owner's Manual & Installation Instructions

About your dryer features.
Cycle Signal Option (on some models)
When the signal is on it will sound just five minutes as a reminder to remove
be h noho rain h e
_/ you to remove tile clothes. Tile signal NOTE:
can be set at OFF (no sound), LOUD or
anywhere in between. • If items are removed before the end of
the cycle, turn the CYCLESELECTORknob
If ttle..dried load cannot be removed • Removet° OFF.
I
promptly during
the EASY CARE cycle,
the C) cle Selector will advance to the of the signaLgarmentSplacePr°mptlYclothes atonthehangersSOUnd
EXTENDED COOL DOWN setting. Unheated SOwrinkles won't set in.
tumbling continues during EXTENDED
COOL DOWN and WRINKLE CARE (on • Use the Cycle Signal especially when
some models) for 40 minutes to help
drying fabrics like polyester knits and
reduce wrinkling. When die CYCLE permanent press. These fabrics should
be removed so wrinkles won't set in.
SIGNAL is on, it will sound briefly every
WRINKLE CARE
EXTENDED C0 0L AIR TUMBLE
ON
ii
Wrinkle Care Option (on some models)
Use this option to minimize tile wrinkles
in clothes. It provides approximately 15
minutes of no-heat tumbling after tile
cloflles are d_y.
This option can only be used with the EASY
CAREand DELICATEScycles.
Replacing the Dryer Light Bulb (on some models)
A WARNING: reduce tile
risk of electric shock, disconnect fllis
appliance flom file power supply
before attempting any user
mainmnance. Turning the controls
m the OFFposifion does not
disconnect this appliance flom the
power supply.
The dryer light is locamd above the dryer
door opening.
Before replacing the light bulb, be sure m
unplug the dryer power cord or disconnect
tile dcyer at tile household distribution
panel by removing tile fllse or switching
off tile circuit breakeL
Toreplace the dryer light:
[--_ Using a small fiat blade screwdriver,
pry tile t)ottom of tile light cover out
and off tile light housing.
[_-] Unscrew tile bulb when cool and
replace it with an appliance bulb of
tile same or lower wattage.
V_] Snap the light cover back on tile light
housing.
Drying Rack (on some models)
A handy drying rack may be used for drying
articles such as smff_d toys, pillows or
washable sweaters.
[_] Remove tile lint screen.
[_--]Place tile flont bar under tile lip of tile
lint screen opening.
[j] _qlen items are dD,, remove tile rack
and replace the lint screen. DO Nor
OPERATE THEDRYER WITHOUTTHEtINT
SCREEN IN PLACE UNLESSTHEDRYING
RACK IS IN PLACE.
NOTE:
• Tile dxying rack must be used Mill file
TIMEDDRY cycle.
• Do not use this d_ying rack when there
are other clothes in tile d_yeL
7