GE DBVH512 Owner's Manual page 14

Reversing t hedoorswing.
STEP-BY-STEP INSTRUCTIONS (cont.)
Remove Hinge
IMPORTANT" Note tile location ot tile hinge (left or right) before removing.
8. _\'ith tile door tl"ame part of tile door laid down on a protected soft sm'L_ce,
reinove tile hinge cover by removing tile 2 tapping screws (#8) that tasten it
to the fl'ame. The hinge cover is located at the opposite side of the hinge
assembly.
9. Remoxe tile 9 nuts, washers and tile 9 machine screws (#8).
10.
Remoxe tile hinge assembly by remoxing tile 2 machine screws (#8) that
fi_sten it to the fl'ame. Pull the him*e assemblx out and set it aside.
Reinstall Hinge Assembly
11.
Place tile hinge assembE in tile
opposite
side of tile door.
_Mign
tile hinge
holes with the door holes.
14
12. I,ooselx tasten tile hinge assembly to tile edoe using 2 machine screws (#8).
13. Hold tile door on its side with one hand and tasten tile remaining 2 screws
as shown. Then tighten the 2 screws (#8) holding the hinge assemblL