Setting The Controls - GE PHP900 Owner's Manual

Setting the controls.
Using the Touch Control.
Touch the pad lightlg with the flat part
of gour fingertip. Touch the center of the
pad to ensure the cooktop response,
A "beep" sound can be heard with each
touch to ang pad.
ii i i i i i i i i
Operating the Cooking Elements
Each of the cooking elements have
separate ON/OFF pads and LEDdisplay.
Be sure to use cookware that meets the
minimum pan size requirements.
Toturn on o cooking element:
[] Placea pan with food onto the
induction element. The pan size
should match the indicator ring.
[] Touch the ON/OFF pad, "5" will flash
in the display,
[] Touch the (+)or (-) pad to select power
level and to activate the induction
element. A sound will beep. The (+)or
(-)pad must be pressed within 10
seconds to activate the element.
NOTE:You can also touch and hold the
pad to scroll quicklg to the desired setting.
The induction circuit detects the pan and
allows the element to be activated. Both
the element ON indicator light and the
cooktop HOTSURFACE light will illuminate.
If no power level is selected within 10
seconds,the zone will be deactivated.
To turn the control to OFF,touch the
ON/OFFpad. The induction element will be
turned off and the display will be blank.
With an element control ON:
If a pan is removed or moved to off-center
from the cooking ring, the control will flash
"F" along with the power setting. After 30
seconds,the element will be deactivated
and displays will turn off.
If the pan is placed back on the zone
within 30 seconds, the flashing will stop
and cooking will resume.
ii¸ : 2 !-!!
The power level with a fraction
indicates the additional half-step
setting.
Power Level Settings
The cooktop offers 19 power levels,
including a Boost setting. Power levels
range from "L" to 9 in precise half-step
increments. For example: 1 1-1/2, 2,
2-1/2 and up to power level 9.
Power Level "L", the lowest setting, is
recommended for "Keep Warm."
The power level increases one-half level
with each touch.
Power level g is the highest normal
power setting.
10
Flashing "F" in the Display
If a pan is removed or moved off-center
from the cooking ring during the
cooking process, the control will flash
"F" along with the power setting. The
flashing "F" indicates that the pan is no
longer detected, After 30 seconds, the
element will be deactivated and the
displag will turn off,
If the pan is returned to the surface
element within 30 seconds, the flashing
"F" will disappear and cooking will
resume.