Oven Light Bulb; Probe; Control Panel - GE JTP18 Use And Care Manual

Control Panel

It's a good idea to wipe the control panel after each use. Clean with mild
soap and water or vinegar and water, rinse with clean water and polish dry
with a soft cloth.
Do not use abrasive cleansers, strong liquid cleansers, plastic scouring
pads or oven cleansers on the control panel—they will damage the finish.
A 50/50 solution of vinegar and hot water solution works well.

Probe

The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the
temperature probe before cleaning. Scour stubborn
spots with a soap-filled scouring pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.

Oven Light Bulb

NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
The light bulb is located on the top of the oven.
Before replacing the bulb, disconnect electrical
power to the oven at the main fuse or circuit breaker
panel. Let the bulb cool completely before removing
it. For your safety, do not touch a hot bulb with a
damp cloth. If you do, the bulb will break.
To remove: Turn to remove the cover, then remove
the bulb.
To replace: Put in a new 40-watt appliance bulb.
NOTE:
• A 40-watt appliance bulb is smaller than a standard
40-watt household bulb.
• Install and tighten the cover.
• Reconnect electrical power to the oven.
36
CARE AND CLEANING
(continued)
Socket
Bulb
" Max.
3 1 ⁄
2
length
Glass cover