GE PT916 Owner's Manual page 24

Care and cleaning of the oven.
Oven rack( Oven _aoks
All oven racks may be cleaned by hand
with an abrasive cleaner or steel wool.
After cleaning, rinse file racks with clean
water and dry wifll a clean cloth.
The oven racks may remain in file oven
during selfLcleaning cycle without being
damaged.
If file racks become ]mrd to slide, wipe
flleir side edges wifll a light coating of
vegetable oil after cleaning them by hand
or in the oven. This will help maintain
the ease of sliding the racks in and out
of the oven.
Control Panel
It's a good idea to wipe file control
panel after each use. Clean wifll mild
soap and water or vinegar and water;
rinse wkh clean water and polish &T
with a soft doth. When cleaning,
the control panel should be at room
mmperature and not in direct starlight.
Do not use abrasive cleansex_, strong
liquid cleansers, plastic scouting pads or
oven cleaners on the control panel--alley
will damage the finish. A 50/50 sohlfion
of vinegar and hot water works well.
Stainless Steel Surfaces
(on somemodels)
Bo notuse a steel wool pa& # will scratch
thesurface.
To clean die stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow
the cleaner insaucdons fbr cleaning
the stainless steel smface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest you,
please ca/1 our toll-flee number:
National Parts Center
1.800.626.2002
GEApp/iances.com
24