GE JSP46 Owner's Manual page 17

www.GEAppliances.com
How to Delay the Start of Cleaning
Make sure the clock shows the correct
time of day.
[-_ Touch the SELFCLEAN pad.
_-] Using the number pads, enter the
desired clean time.
I-if] Touch the
DELAY STARTpad.
The
earliest start time you can set _411
appear in the display.
[] Using the number pads, enter the
time ofdayyou want the clean cycle
to start.
I-if] Touch the
STARTpad.
The door locks automatically. The
display _4ll show the start time. It _4ll
not be possible to open the oven door
until the temperature drops below the
lock temperature and the LOCKED light
goes oK
Vvqlen file LOCKED light is off, open the
door.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth alter
the oven cools.
If whitespotsremain, r emove themwith a soap-
filledsteel woolpadandrinsethoroughly with a
vinegar a nd watermixture.
These deposits are usually a salt
residue that cannot be removed by
the clean cycle.
If din oven is not clean _er one clean
cycle, repeat the cycle.
_i You cannot set the oven for cooking
until the oven is cool enough for the
door to be unlatched.
If dm shelves become hard to slide,
apply a small amount of vegetable oil
or cooking oil to a paper towel and wipe
the edges of the oven shelves _4th the
paper towel.
17