Door Alignment - GE ZFSB23DXCSS Owner's Manual

Additional Features
Stainless Steel IG(/}'igeralor
t frigerator
door6
The refl'igerator (loot_ may feel different than
the ones you are used to. The special door
opening/closing ti_ature makes sure the doors
close all the way and are securely sealed.
When opening and closing the door you will
notice a stop position. If the door is opened
past this stop point, the door will remain open
to allow vou to load and unload food more
easily. When the door is only partially open,
it will automatically close.
The resistance you teel at the stop position will
be reduced as the door is loaded with food.
I
7
Whenthe door is onlypartially open,
it will automaticallyclose.
Beyondthis step the doorwill stay open.
Door
alignment
If (loot_ are uneven, at!just the refl'igerator door.
1 Using a 7/16" socket wrench, turn the door
a(!iusting screw to the right to raise the do(m
to the lett to lower it. (A nylon I)lug, imbedded
in the threads of the pin, prevents the pin
fl'om turning unless a wrench is used.)
2 After one or two turns of the wrench, open
and close the refrigerator door and check the
alignment at the top of the doors.
\
Toremovethe base
grille, openthe
doors,removethe
screwat eachend
of the basegrille
andthenpull the
grille straightout.
7/16" Socket W rench
Raise
15