TYAN Thunder K7X Pro (S2469 Manual page 17

The following diagram will illustrate how to install the most common heatsinks:
17
http://www.TYAN.com
First, use thermal compound
(also called heatsink compound
or thermal grease) and apply a
small amount on
processor's core (applying too
much will actually reduce the
cooling) – the small shiny square
in the center of the processor.
You may then use a small soft
plastic tool, like a credit card to
gently smear a thin layer of
heatsink compound as evenly as
you can across the core.
Because one side of the socket
is raised (and usually
"SOCKET" imprinted
heatsinks have an indent on one
side to secure flush with the
raised side of the
Then clip one side of the
heatsink onto the socket and
then lay the heatsink flat onto
the processor. Then clip the
other end of the heatsink down
either with your finger or by
using a flathead screw driver.
Be sure to carefully observe
which side your heatsink is
seated before securing it down
to avoid damaging
processor, the heatsink or both.
This is will probably be the most
difficult portion of setting up your
computer so please exercise
caution. TYAN will not accept
responsibility and no warranty
will be given for damage due to
improperly installed heatsinsks.
to the
has
into it)
socket.
the