Security Menu - TYAN Transport GS14 (B5121G14S2 Manual

Native Mode Operation select the Native mode for ATA.
SATA Controller Mode Option select either Compatible or Enhanced mode.
When Compatible mode is selected, SATA and PATA drivers are automatically
detected and placed in Legacy mode.
When Enhanced mode is selected, SATA and PATA drivers are automatically
detected and placed in Native mode.
Advanced Processor Options
APIC Interrupt Routing turns on and initializes I/O APIC (Advanced
Programmable Interrupt Controller).
Compatible FPU Code enables or disables FPU (Floating Point Unit).
I/O Device Configuration
Serial Port A/B, Base I/O Address, and Interrupt sets the input/output address
and Interrupt ReQuest line (IRQ) for the on-board serial ports (COMA/COMB)
controller.

Security Menu

The Security menu contains the security settings that protect your system against
unauthorized use.
Supervisor/User Password indicates if a Supervisor or User password exists.
Set Supervisor/User Password sets the Supervisor/User password. The Supervisor
can access the Setup program and boot the system while the User can only boot the
system. Passwords are not case-sensitive.
Diskette Access sets the accessibility of the floppy disk drive.
Fixed Disk Boot Sector protect the boot sector against any change.
CAUTION: Set this item to disabled before installing an operating system, running
Fdisk or Format program, or when re-installing software. Otherwise, the intended
action will fail.
Virus Check Reminder displays the virus check reminder message during system boot
up.
System Backup Reminder displays the system back up reminder message during
system boot up.
Password on Boot determines if the system will request a password when starting up.
42
http://www.TYAN.com