GE Monogram ZDP304LP2SS Owner's Manual page 18

30", 36" and 48" professional dual fuel ranges
Table of Contents

Advertisement

Available languages

Available languages

Oven Racks
Professional
Dual Fue! Range
Full
extension
oven racks
-&CAUTION: To °void
possible
burns, place the racks in the correct position
before turning on the oven.
The correct rack position depends on the
kind of food and the browning desired.
The racks have a frame that locks into the
rack supports on both sides. Once the frame is
locked into place, always pull the rack out, by its
upper front rail, to its full extension stop position,
when placing or removing cookware.
Remove
and
replace
oven rocks
To remove a rack:
1. Make sure the rack is pushed all the wag into
the oven.
2. Grasp the rack by both its upper front rail and
its lower front rail and lift straight up to unlock
the front rack locks from the rack supports.
Lift to unlock front
rack locksfrom
the rack support
To replace a rack:
1. Place the rear rack locks over and onto
the rack supports (five rack positions are
available including the top position).
Frontrack lock
Upper
_frontrail
:
front rail
3. Firmly holding onto both the upper and lower
front rack rails, pull the rack forward and
remove it from the oven.
2. Slide the rack all the way in until the
rear rack locks are secure on the rear rack
supports and press the front rack locks onto
the front rack supports.
/
Frontrack
lock
Slide the rack all the way in
and pushdown to lockthe
front rack locks ontothe
front rack supports
3. Pull the rack all the way out to check that it is
properly engaged.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents