Table of Contents
Advertisement
Navigating.
You can quicklg step through to a specific item you want to change bg pressing the
HEAT/COOL button until the item gou want to change is flashing. When the item gou want
to change is flashing, use the UP or DOWN button to make gour change.
Exiting program mode.
Pressing the PROGRAM button at any time will exit you out of the programming
mode, save
your changes to memory
and return gou to normal thermostat
operation.
Run button - program/manual
operation.
The RUN button toggles the thermostat
between program operating
mode and manual
operating
mode. When in the program mode, gour thermostat
responds to the times and
temperatures
programmed.
Program
Mode
,_, 1
One of the four periods, in this case "Day," is displayed, letting you
_:_r_o_ 5_"
know which period of the day it is in.
_u
Changing temperature
while running a program.
You can always change the temperature
up or down while a program
is running. However,
when the program moves to the next period, the programmed
set point temperature
for that
period will start. For instance, assume the current program period is Evening, with a programmed
temperature
of 70° and the next period, Night, is programmed
for 65 °, scheduled to start at
11 pm. If during the Evening time period gou want it warmer, press the UP button and raise the
temperature
above 70°. The thermostat
will hold that temperature
until the next programmed
period comes around, at which point the temperature
will adjust to what is programmed.
In
this case, the Night period is set for 11 pm and 65 °.
When in the manual mode, there will be no time period displayed.
_no
Instead, the word "Hold" will be displayed above the Set Point tern-
_u
perature, indicating
the thermostat
is holding that temperature.
Adjust to the desired temperature,
using the UP and DOWN buttons, and the thermostat
will
maintain
the temperature
you set until gou manuallg change it again.
Advertisement
Table of Contents
