GE RAK348R1 Owner's Manual page 6

Setting the clock.
In all set-up modes, the thermostat will flash the display item you are about to change. The UP
and DOWN buttons change settings, the HEAT/COOL button is used to move to the next item.
To set the clock, you will use the buttons marked CLOCK, UP, DOWN and HEAT/COOL.
Step One
Pressthe CLOCKbutton. The hour digits will flash. Pressthe UP or DOWN button to change the
hour. Note that AM/PM will change us you roll the hour past 12. Be sure to set the hour properly
for AM or PH. Pressthe HEAT/COOLbutton to keep the hour you have just set and to move to
minutes.
Step Two
The Hinute digits will now be blinking. Press the UP or DOWN button to change to the desired
minute. When the correct minute is flashing, press HEAT/COOL.
Step Three
One of the seven day icons (!a, Tu, We, Th, Fn SQ,Su) will now flash. Press UP or DOWN until
the correct day icon is flashing. When the correct day is flashing, press HEAT/COOL
Step Four
Press the CLOCK button to keep all clock changes you have made and resume normal
operation.