Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Petsafe Stay & Play PIF00-13663
Summary of Contents for Petsafe Stay & Play PIF00-13663
- Page 2 If you have any questions, please don’t hesitate to contact us. Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd. and any other affiliate or brand of Radio Systems Corporation may be referred to collectively as “We” or “Us.”...
- Page 3 • Do not place anything on the top of the transmitter or cover any ventilation holes. This may overheat the transmitter and cause early transmit failure. • Do not place transmitter in a closet or any other confined, unventilated area. • Do not place transmitter on or near a metal surface. petsafe.com...
-
Page 4: Table Of Contents
What’s Covered Components................................................5 You May Also Need ..............................................5 How the System Works ............................................6 Key Definitions ................................................6 Operating Guide ............................................... 7 Step 1: Set Up the Transmitter .......................................... 7 Step 2: Charge the Receiver Collar ....................................... 8 Step 3: Prepare the Receiver Collar ....................................... -
Page 5: Components
Long Contact Points Wrench Boundary Flags - 50 You May Also Need • Scissors • Lighter • Screwdriver • Drill • Tape measure • Non-metallic collar and leash or lead For help with setup and training, please visit petsafe.com petsafe.com... -
Page 6: How The System Works
How the System Works The PetSafe Stay & Play Wireless Fence for Stubborn Dogs has been proven safe, comfortable and effective for pets over 5 lb. The system ® ™ works by transmitting a radio signal up to 105 feet in all directions. You temporarily define the pet area with boundary flags for a visual aid in training your pet. -
Page 7: Operating Guide
2. Unplug transmitter power adaptor from the power jack located on the bottom of the transmitter, indicating power is intentionally being suspended. When your power is restored, be sure to reconnect the power adaptor into the power jack of your transmitter. petsafe.com... -
Page 8: Step 2: Charge The Receiver Collar
Step 2: Charge the Receiver Collar Mode Contact Receiver Button Point Indicator Light Receiver Charge Jack The receiver collar charger is designed to plug into a standard AC wall outlet. The receiver collar light will glow red when the receiver charger is properly seated into the receiver charge jack. - Page 9 (3 flashes per second) Fast pulsating red Tone for duration of Static correction being (3 flashes per second) static correction delivered up to 15 seconds Continuous green Over correction protection; No tone (10 seconds) collar locked for 10 seconds petsafe.com...
-
Page 10: Step 4: Adjust The Pet Area To Desired Size
Set the Static Correction Level Read all steps before attempting to set the static correction level. 1. Press the mode button and release (3B) when the receiver indicator light illuminates red (3C). 2. The receiver indicator light will emit a series of red flashes representing the static correction level. 3. -
Page 11: Transmitter Range Chart
95 ft. 50 ft. 105 ft. Note: These distances are approximate. Record Your Settings Final Boundary Switch Final Boundary Control Dial Receiver Static Location Setting (HIGH + or LOW – ) Position (1–8) Correction Level (1–6) Home Camping Vacation Other petsafe.com... -
Page 12: Step 5: Place The Boundary Flags
Step 5: Place the Boundary Flags The boundary flags are visual reminders for your pet of where the boundary zone is located. The receiver collar will activate within 2 to 3 feet of the boundary flags. 1. Using the test light, with the static correction level set at 2 or greater, hold the receiver collar at your pet’s neck height with logo side facing away from the transmitter. - Page 13 Slide Buckle To loosen: Slide the strap through the Fasten Slide and Fasten Buckles and pull down. Buckle To tighten: Slide the strap up through the Fasten Buckle and pull through the Slide Buckle. petsafe.com...
-
Page 14: Training
• While your pet is still learning the boundary, contain him by another means, such as with a pen or a leash. • Put a separate non-metallic collar on your pet’s neck and attach a leash. • Be sure to place the collar on your dog’s neck with the PetSafe logo facing up. -
Page 15: Taking Your Pet Out Of The Pet Area
Congratulations! You have now completed the training program. You are both ready to enjoy more freedom. Just make sure to continue to check the tightness of the receiver collar and remove it when it is not in use. Wireless–to–Go Your PetSafe Stay & Play Wireless Fence for Stubborn Dogs is completely portable. Follow the set-up procedures wherever you wish to have ®... -
Page 16: Troubleshooting
Troubleshooting The receiver collar tone is not sounding • Make sure the receiver collar is turned on and battery status lights are when setting up the boundary zone. flashing every 4-5 seconds. • Charge receiver collar. • The tone may be difficult to hear in a noisy environment. •... - Page 17 This sealing makes it virtually impossible, without misuse or abuse, for your receiver collar battery to leak onto your pet’s neck. Please review and follow the important safety information on page 3, and the instructions in Step 6 under the heading “Fit the receiver collar” on page 12. petsafe.com...
-
Page 18: Terms Of Use And Limitation Of Liability
Terms of Use and Limitation of Liability 1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices. 2. -
Page 19: Important Recycling Advice
This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at www.petsafe.com and/or are available by contacting your local Customer Care Center. United States and Canada—Radio Systems Corporation, 10427 PetSafe Way, Knoxville, TN 37932 USA Australia/New Zealand—In compliance with the Australian Consumer Law, Warranties Against Defects, effective January 1, 2012,... - Page 20 Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 +1 (800) 732-2677 petsafe.com For a list of patents protecting this product, please visit: http://www.radiosystemscorporation.com/patents 400-2348 2018 Radio Systems Corporation ©...
Need help?
Do you have a question about the Stay & Play PIF00-13663 and is the answer not in the manual?
Questions and answers