Uconnect System Features - Chrysler Sebring Convertible Owner's Manual

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
hold may not become active automatically. This is cell
phone-dependent. To bring the call back from hold, press
and hold the PHONE button until you hear a single beep.
Redial
• Press the PHONE button to begin.
• After the Ready prompt and the following beep, say
Redial.
• The UConnect system will call the last number that
was dialed from your cellular phone.
NOTE: This may not be the last number dialed from the
UConnect system.
Call Continuation
Call continuation is the progression of a phone call on the
UConnect system after the vehicle ignition key has been
switched to OFF. Call continuation functionality avail-
able on the vehicle can be any one of three types:
• After the ignition key is switched OFF, a call can
continue on the UConnect system either until the call
ends, or until the vehicle battery condition dictates
cessation of the call on the UConnect system and
transfer of the call to the mobile phone.
• After the ignition key is switched to OFF, a call can
continue on the UConnect system for a certain dura-
tion, after which the call is automatically transferred
from the UConnect system to the mobile phone.
• An active call is automatically transferred to the
mobile phone after the ignition key is switched to OFF.

UConnect System Features

Language Selection
To change the language that the UConnect system is
using:
• Press the PHONE button to begin.