Auto Pan Mode - EverFocus EKB500 User Manual

Back to home if no
action for ___Minute
Move to home position
[ENT] to confirm
Auto Back Enabled
[ ] to toggle

6.1.2. Auto Pan Mode

Two point auto pan: Press A.Pan to enter the auto pan mode, and
then the system will ask you to enter the auto pan speed (1~239). Press
Enter to start auto pan.
Speed:___[1-239]
[ENT] to start.
Position A
Dwell:___[1-239]
Move to Position B
[ENT] to confirm
Enter the specific time to go back home
position, and then press Enter.
Switch the Joystick to move the view to
the home position, and then press Enter
to confirm the home position.
Switch the Joystick to enable or disable
the auto back home function, and then
press Enter to confirm.
In order to set the two points, press Set
+ A.Pan, and then enter the dwell time
(1~239 seconds) of position A.
Move to the position B of auto pan, and
then press Enter.
30