Load Default Setting; Firmware Update - EverFocus EKB500 User Manual

4.3.9. Load default setting

Load default setting
Press [ ENT ] to load.
Input 123 to start
_ _ _ [ ENT ]
The setting will go back to keyboard setting if the password is wrong.
The setting will go back to keyboard setting after a long buzzer if the password
is right, and every setting will be cleaned up.

4.3.10. Firmware update

Input 123 to start
_ _ _ [ ENT ]
Press Enter to load default setting.
In order to prevent a mistake, system
will ask you to enter 123, and then
press enter to start to load default.
In order to prevent a mistake, system
will ask you to enter 123, and then
press enter to start firmware update.
23