Position Setting - EverFocus EKB500 User Manual

Position B
Dwell:___[1-239]
360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. The
camera will turn 360° automatically, but not tilt.

6.1.3. Position Setting

Focus on a preset position: Press the number key, and then press
Position to focus on the number of preset position; or you can press
Position, then enter the preset position number, and then press Enter
to focus on the number of preset position.
Camera:0001 go to
Position:___[1-192]
Preset a position: Shift the Joystick to the position you would like to
preset, and then press Shift + Position. The system will ask you to
enter the preset position number (1~239), and then press Enter to save
the position. There are up to 192 positions can be preset.
Camera:0001 Save to
Position:___[1-192]
Set the parameter of a preset position: Press Set + Position to set
the parameter of a preset position. You can set the going-to speed
(1~239), dwell time (1~239 seconds), and the title of the position.
Enter the dwell time of position B, and
then press Enter to finish setting.
31