EverFocus EKB500 User Manual page 27

To add a speed dome into the keyboard device is necessary. Please check
camera setting on page 12 to get more information.
To get controlled over a camera (speed dome):
CAM : 0001
[ CAM / MON / DVR ]
There are 2 ways to get controlled over a speed dome camera.
1. Press the CAM key, and then the CAM line on the display will start to flash.
Press Enter after the camera name is keyed in, and you can start to operate
the speed dome camera.
2. Enter the camera name, and then press CAM to get controlled over a speed
dome camera.
To operate a camera (speed dome):
You can operate the selected speed dome camera by using camera
reservation keys of EKB500. The functions that can be operated by the
EKB500 depend on different protocols. The buzzer will buzz three times if the
protocol does not suppose the function after pressing the function key.
Camera main function table:
Function
Manual up/down/right/left
Zoom In/Out
Focus Far/Near
MON : 0001
Key
Switch the Joystick up/down/right/left.
Press Zoom In / Zoom Out.
Press Focus F. / Focus N..
27