EverFocus EKB500 User Manual page 33

the tour after pressing Enter. To preset a tour before running it is
necessary.
Camera:0001
Run Tour:__[1-16]
Preset a one-way tour: Press Set + Tour to preset an one-way tour.
The system will ask you to enter preset position numbers (The positions
need to be preset). After finish entering all positions, press Stop to quit,
and then press Enter to save the tour.
Set Camera:0001
Tour:__[1-16]
Tour:001 Pos#01:001<
[ENT] to save
To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The
system will ask you to enter the tour number you would like to run, and
starts the tour after pressing Enter. To preset a tour before running it is
necessary.
Note: The difference between the One-way tour mode and To-and-fro tour
mode is that the return modes are different. For example: There is a tour with 3
preset positions 1, 2 and 3. The camera runs 1 2 3 1 2 3 in the One-way
tour mode, and 1 2 3 2 1 in the To-and-fro tour mode.
Add Position#01:___
[ENT / STOP]
33