Buzzer On/Off; Joystick Calibration - EverFocus EKB500 User Manual

Alarm password
set but disabled.

4.3.5. Buzzer ON/OFF

Buzzer can be enabled or disabled by setting here. Switch Joystick to
change the buzzer status, and then press Enter to confirm.
Buzzer Enabled
@ @ @ @ to toggle
[

4.3.6. Joystick Calibration

Joystick calibration helps users to test the functions of the Joystick.
Release Joystick
and press [ ENT ]
Move joystick
to corners.
X+000 Y+000
X-000 Y- OK
There are 3 ways that are X, Y and Z to be checked, and each way has 2
Buzzer Disabled
[
Release Joystick, and then press Enter to
test or press Esc to quit test.
The message shows up after pressing
Enter.
Z+000
Z-000
21
@ @ @ @ to toggle