Model 2160 Series User Manual
Setup Command Menu
The setup command menu lists commands for initially configuring the Model 2160. Move the cursor " >>" to
setup in the main menu and press Enter.
When you enter the setup command, the following menu displays:
>>
line
Configure line parameters
lan
Configure LAN interface profile
vlan
Configure virtual LAN parameters
qos
Configure Quality of Service parameters
rate
Configure Rate Control parameters
Manage-
Configure management interface profile
ment
dhcp
Configure DHCP parameters
dns_proxy Configure DNS proxy parameters
hostname
Configure local host name
default
Restore factory default settings
Line
The line command menu lists commands for setting up the line port. Move the cursor " >>" to line in the
setup menu and press Enter. The following menu displays:
>>
mode
Configure line mode
link
Configure line link
annex
Configure line annex type
tcpam
Configure line TCPAM type
maxMainRate
Configure line max main data rate
snrMargin
Configure line SNR margin
lineProbe
Configure line line probe
clear
Clear current CRC error count
Table 15
shows the options available within the line command menu:
Mode
Link Type
Annex
TCPAM
Max Main Rate (3–89)
SNR Margin
Line Probe
Setup Command Menu
Table 15. Line Options
Menu
STU-C
2-wire
AF
Auto
(-10–21)
Disable
5 • Console and Telnet configuration
Options
STU-R
4-wire
8-wire
BG
TCPAM-16
TCPAM-32
Enable
TCPAM-64
76