Community Pool; Snmp Administration Page; Snmp Community Pool Configuration; Default Snmp Communities - Patton electronics COPPERLINK 2160 Series User Manual

Model 2160 Series User Manual
Click SNMP in the Administration menu to set up the parameters.

Community Pool

An SNMP community is a group of devices and management stations running SNMP. It helps define where
information is sent. The community name is used to identify the group. A SNMP device or agent may belong
to more than one community. It will not request information from management stations that do not belong to
one of its communities.
Click Modify to set up community pools.
In the table of the current community pool, you can set up access:
• Status: Enable–Turn on the SNMP function; Disable–Turn off the SNMP function
• Access Right: Deny–Restrict all access; Read–Read-only access; Write–Read/write access
• Community: The password for write access.
Administration Options
Figure 49. SNMP Administration page
Table 11. Default SNMP Communities
Access Right
Read
Write
Figure 50. SNMP community pool configuration
Community
public
private
4 • Web configuration
64