Receiving Traffic Information While Playing Cd Or Radio; Priority News; Displaying Radio Text - Alpine CDE-9827RR Owner's Manual

Receiving Traffic Information While Playing
CD or Radio
1
Press T.INFO so that the "T.INFO" indicator lights
up.
2
Press g and f to select a traffic information
station if necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player/changer or the regular
FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1
minute, the "T.INFO" indicator blinks.
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
• The receiver is equipped with the EON (Enhanced Other
Networks) function in order to keep track of additional alternate
frequencies to the AF list. The "EON" indicator lights up while an
RDS EON station is being received. If the station being received
does not broadcast the traffic information, the receiver
automatically tunes in the related station that broadcasts the traffic
information when it occurs.
3
Press T.INFO to deactivate the Traffic Information
mode.
The "T.INFO" indicator goes out.

Priority News

This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it
begins broadcasting, and interrupts the programme you are currently
listening. This feature is functional when your unit is set to a mode
other than the LW and MW modes.
1
Press F/SETUP so that the "FUNC" indicator lights
up while the unit is in Radio (FM receiving) mode.
2
Press 2/NEWS to activate the PRIORITY NEWS
mode.
The "NEWS" indicator appears in the display.
To disable the PRIORITY NEWS function, press 2/NEWS.
• In the PRIORITY NEWS function, unlike in the T.INFO function,
the volume does not increase automatically.
3
Press F/SETUP to activate the normal mode, while
the unit is in Radio (FM receiving) mode.
The "FUNC" indicator light goes out.

Displaying Radio Text

Text messages from a radio station can be displayed.
1
Press DISP/TITLE while receiving FM in the radio
mode to select the Radio Text display.
The display will change every time the button is pressed.
PS (Programme Service Name) → Radio Text → FREQUENCY
→ PS (Programme Service Name)
The display shows "WAITING" for a few seconds, then starts
scrolling the text message.
• If there is no receivable text message or the unit cannot receive a
text message properly, the display shows "NO TEXT."
9
-EN