Operating The Steam Mop - Oreck Grab It & Steam It User Manual

Operation
Steam Mop Operation:
continued
1
3
7
E N
Align and attach Velcro
1
steam mop pad holder.
To attach the Grab-It & Steam-It's microfiber steam mop pad holder, place foot on release pedal
2
and gently push down, lower the power head onto the microfiber steam mop pad holder and
LIGHTLY press down to snap into place.
NOTE: Never operate the steam mop without the microfiber steam mop pad in place.
Grasp the water tank release lever and pull forward to remove the water tank.
3
Remove cap from the water tank bottom and fill with water. Replace the cap and reinstall the
4
water tank.
NOTE: Do not attempt to use steam mop without water in tank.
G L I S H
on the microfiber steam mop pad to the Velcro
®
on the microfiber
®
2
Release Pedal
4