Related Manuals for Oreck SPEED SWEEP TEK 100
Summary of Contents for Oreck SPEED SWEEP TEK 100
- Page 1 S I M P L Y A M A Z I N G ® ’ Uide SPEED SWEEP odel •IMPORTANT• SAVE THIS BOOKLET! Includes: Important Safety Instructions Warranty Operating Instructions REGISTER YOUR PRODUCT ON THE WEB: WWW.ORECK.COM...
-
Page 2: Important Safety Instructions
• Do not use extension cords or outlets with inadequate current carrying capacity. • Do no handle charger or vacuum cleaner with wet hands. • Do not incinerate or mutilate batteries as they will explode at high temperatures. -
Page 3: Safety Warning
If damage has occurred, do not use this product. Take it to an authorized Oreck Clean Home Center for service. All packing materials (plastic wrapping, cardboard box, etc) are potentially dangerous and must be kept out of children’s reach. -
Page 4: Warranty
Warranty ORECK MANUFACTURING COMPANY: (ORECK gives you the following limited warranty for this product only if it was originally purchased for use, not resale, from ORECK or an ORECK Authorized Retail Dealer.) ORECK will repair or replace, free of charge, to the original purchaser, any part which is found to be defective in material or workmanship within one (1) year of the date of purchase. -
Page 5: Parts & Accessories List
Parts & Accessories List 1. Handle 2. Upholstery brush 3. Crevice tool 4. Accessory hook 5. Handle button 6. Battery release button Battery compartment 8. Power button 9. Carry handle 10. Dirt Cup 11. Roller brush release button 12. Roller brush 13. -
Page 6: Dirt Cup Assembly
Assembly Instructions Before assembling, please be sure that all parts and accessories are included by reviewing the Parts and Accessories List. Dirt Cup Assembly As is shown in the Figure below, place the toll bar of the dust barrel on the back of the unit, and press down the dirt cup. - Page 7 Assembly Instructions Assembly of roller Brush As is shown in the figure below, carefully insert the roller brush into the unit, making sure to align within the specific guide slots and ensuring electric contacts are fully aligned. ELECTrICAL COnTACTS GUIDE SLOTS Assembly of the Handle As shown below, pressing the handle release button will allow for the handle to be removed from the main unit.
-
Page 8: Operation
Assembly Instructions Operation 1. It is necessary for the rechargeable battery to be fully charged prior to use. 2. The charger is uniquely designed for the rechargeable Ni-MH battery, rating: Input: 120V, 60 Hz, 50mA; Output: 9V DC, 280Ma; Class: 2 3. -
Page 9: Accessory Items
Assembly Instructions Accessory Items Included with this unit are two accessory items: a crevice tool and upholstery brush. A) Crevice Tool Shown below, the crevice tool is attached for cleaning in tight spaces. B) Upholstery Brush With the crevice tool still attached, affix the upholstery brush to the end of the crevice tool as indicated below. -
Page 10: Maintenance
1. Dirt Cup filter After emptying the dirt cup as described above, the filter can also be cleaned at the same time. By grasping the filter screen guard in one hand, use the opposite hand to rotate the handle as indicated by the arrow direction shown on the top of the filter. -
Page 11: Troubleshooting
Problem The unit does not work or turn on. roller brush is not working The indicator lamp (red) does not work when charging Troubleshooting Cause 1. The battery has been inserted incorrectly 2. The battery has not been charged 1. Roller brush has debris wrapped around it. -
Page 12: Battery Disposal
Failure to comply with these warnings could result in fire and/or serious injury. ©2009 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks are owned and used Battery Disposal To preserve natural resources, please recycle or dispose of expired battery pack properly.