Operation
continued
1
3
6
E
N
Power Broom Operation:
Press the "SWEEP ON/OFF" button to activate the brush roll.
1
NOTE: The power broom can operate on hard floors with or without the steam mop pad
holder attached.
NOTE: Remove steam mop pad holder when using on low pile carpeting.
To empty the debris cup grasp the cup handle and lift out.
2
Press the release button on the rear of the cup to open and empty.
3
Replace the debris cup.
4
NOTE: Do not operate the power broom without the debris cup in place.
NOTE: Do not lift the power broom off of the floor while operating.
Release Button
G
L
I
S
H
2
Cup
Handle
4