Download Print this page

Craftsman 315.269290 Operator's Manual page 18

1/2 in., professional cordless hammer drill variable speed / reversible

Advertisement

Available languages

Available languages

_I,
WARNING:
When servicing use only identical
Craftsman replacement
parts. Use of any other
parts may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
_,
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based
products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy
plastic.
Do not abuse power tools. Abusive practices can damage
tool as well as workpieoe.
Only the parts shown on parts list, pages 20 and 21, are
intended to be repaired or replaced by the customer. All
other parts should be replaced at a Sears Service Center.
,_
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
BATTERIES
The battery pack for your drill is equipped with nickel-
cadmium rechargeable batteries. Length of service from
each charging wUI depend on the type of work you are
doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
Store and charge your batteries in a cool area.
Temperatures
above or below normal room
temperature will shorten battery life.
Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge. If
you store your tool for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery life.
To preserve natural resources, please
recycle or dispose of properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options'.
BA'R'ERY
PACK
REMOVAL
AND PREPARATION
FOR RECYCLING
,_
WARNING:
Upon removal, cover the battery pack's
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
The following recommended
accessories are currently available at Sears Retail Stores.
6-Pc. Extra Length Magnite Power Bit Set
30-Pc. Power Screwdriver/Nutdriver
Set and Case
17-Pc. Power Screwdriver/Nutdriver
Set and Case
High Speed Bits......1/2 in. Max.
Wood Boring Bits......1-1/4 in. Max.
Masonry Bits ...... 1/2 in. Max.
_k
WARNING:
The use of attachments or accessories not listed might be hazardous.
18

Advertisement

loading

This manual is also suitable for:

315.269280