1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Drill
  5. 315.274990
  6. Owner's manual

Craftsman 315.274990 Owner's Manual

Variable speed / reversible professional 1/2 in. cordless hammer drill
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual
II:RRFTSMRN'I
Variable Speed / Reversible
PROFESSIONAL 112in.
CORDLESS HAMMER DRILL
Model No.
315.274990
Save this manual for
future reference
_L
CAUTION:
Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
Customer Help Line: 1-800-932-3188
Sears,
RoebiJck
and Co., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-536
7-98
• Safety
• Features
• Operation
• Maintenance
• Parts List
NRTL

Advertisement

Table of Contents
loading

Related Manuals for Craftsman 315.274990

Summary of Contents for Craftsman 315.274990

  • Page 1 Safety Rules and Operating • Features Instructions before first use of • Operation this product. • Maintenance Customer Help Line: 1-800-932-3188 • Parts List Sears, RoebiJck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-536 NRTL 7-98...
  • Page 2 Exploded View and Repair Parts List ......................• Parts Ordering / Service ..........................FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL CORDLESS HAMMER DRILL If this CRRFTSNRN" Professional Cordless Hammer Ddl,Ifails due to a defect in material or workmanship within one year from the date of purchase, Sears will repair i_ free of charge.
  • Page 3 The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

  • Page 4: Rules For Safe Operation

    I_ld workpiece in your hand or across your legs. replaced by an authorized service center unless, WREN SERVICING USE ONLY IDENTICAL indicated elsewhere in this instruction manual. CRAFTSMAN REPLACEMENT PARTS. DO NOT USE TOOL IF SWITCH DOES NOT IMPORTANT SAFE'r_f INSTRUCTIONS TURN IT ON AND OFF.
  • Page 5 RULES FOR SAFE OPERATION (Continued) Make sure cord is located so that it will not be DO NOT OPERATE CHARGER WITH A stepped on, tripped over, or otherwise subjected DAMAGED CORD OR PLUG. If damaged, to damage or stress. have replaced immediately by a qualified serviceman.

  • Page 6: Wrist Strap

    DEPTH GAGE KNOW YOUR HAMMER DRILL See Figure 1. A depth gage rod has been packed with your drillto assist you in controlling the depth of drilled holes. Before attempting to use any tool familiarize yourself with all operating features and safety requirements. APPLICATIONS WARNING: Ifany parts are missing, do not operate...

  • Page 7: Battery Charger

    BATrERY PACK BACKSIDE OF CHARGER 1-7/16 in. BATTERY CHARGER GREEN LIGHT " ON" INDICATES SLOW CHARGING MODE O R FULLY CHARGED RED UGHT "ON" CHARGING MODE YELLOW UGHT "ON" A ND RED UGHT FLASHING INDICATES DEFECTIVE BATTERYPACK Fig. 2 IMPORTANI" INFORMATION RECHARGING HOT BATTERIES...

  • Page 8: Led Function

    If battery pack is deeply discharged, red light should WARNING: Always wear safety goggles or safety glasses with side shields when operating become steady after voltage has increased, tools. Failure to do so could result in objects normally within 30 minutes. being thrown into your eyes, resulting in possible If after one hour red light is stillflashing, this serious injury.
  • Page 9 SWITCH TO INSTALL BATI'ERY PACK See Figure 3. • Lock switch trigger on your drill by placing the direction of rotation selector in center position. To turn your drill ON, depress the switch trigger. To See Figure 3. tum it OFF, release the switch trigger. •...
  • Page 10 SWITCH LOCK KEYLESS CHUCK See Figure 6. See Figure 7. The switch trigger can be locked in the OFF position. Your new drill has a keyless chuck. As the name implies, This feature can be used to prevent the possibility of you can hand tighten or release drillbits in the chuck accidental starting when not in use.
  • Page 11 INSTALLING BITS AUXILIARY HANDLE See Figure 9. See Figure 8. • Lock the switch trigger by placing the direction of An auxiliary handle is packed with your drill for ease rotation selector in center position. See Figure 6. of operation and to help prevent loss of control. The handle can be rotated 360 °...
  • Page 12 REMOVINGBITS When drilling holes with the depth gage rod installed, the desired hole depth has been reached when the See Figure 9. end of the rod comes in contact with the surface of the • Lock the switch trigger by placing the direction of material being drilled.
  • Page 13 ADJUSTABLETORQUECLUTCH BIT STORAGE See Figure 14. Yourdrillis equipped withanadjustable t orque clutch When not in use, bits provided with your drill can be for driving different types of screws into different materials. The proper setting depends on the type of placed in the storage area located on the top of your drill as shown in figure 14.

  • Page 14: Wood Drilling

    DRILLING When drilling metals, use a light oil on the drill bit to See Figure 16. keep it from overheating. The oil will prolong the life of the bit and increase the drilling action. If the bit jams in workpiece or if the ddll stalls, release switch trigger immediately.
  • Page 15 Insert allen wrench in chuck and tighten chuck CHUCK REMOVAL jaws securely. Tap sharply with a mallet in a See Figures 17, 18, and 19. counterclockwise direction. This will loosen chuck The chuck must be removed in order to use some on the spindle.

  • Page 16: For Recycling

    Do not abuse power tools. Abusive practices can WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other damage tool as well as workpiece. part may create a hazard or cause product Only the parts shown on parts list, page 17, are damage.

  • Page 17: Parts List

    CRAFTSMANPROFESSIONAL 112 in. CORDLESS HAMMER DRILL MODEL NO. 315.274990 number in all correspondence regarding your 1/2 in. CORDLESS HAMMER DRILL or when The model number will be found on a plate attached to the motor housing. Always mention the model ordering repair parts.
  • Page 18 For in-home major brand repair service: Call 24 hoursa day, 7 days a week 1-800-4-MY-Home s. (1-800-469-4663) Para pedir servicio de reparaci6n a domicilio - 1-800-676-5811 In Canada for all your service and parts needs call - 1-800-665-4455 Au Canada pour tout le service ou les pi_ces For the repair or replacement parts you need: Call 7 am - 7 pm, 7 days a week...

Table of Contents