Page of 20

CRAFTSMAN 315.271271 Owner's Manual

Cordless hammer drill.
Hide thumbs
Owner's Manual
IPR
0 FESSl
0 HAL
i
112 in., 18 VOLTS PROFESSIONAL
CORDLESS HAMMER DRILL
Variable Speed / Reversible
Model No.
315.271271
Save this manual for
future
reference.
_,
CAUTION:
Read and
follow all Safety Rules and
Operating Instructions before
first use of this product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-822
2-01
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
®

Advertising

   Related Manuals for CRAFTSMAN 315.271271

   Summary of Contents for CRAFTSMAN 315.271271

  • Page 1

    Safety Rules and Operating Instructions before • Assembly first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 • Parts List ® Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-822 2-01...

  • Page 2

    TABLE OF CONTENTS • General Safety Rules ..............................• Specific Safety Rules/Symbols ..........................• Features ..................................• Assembly .................................. 9-10 • Operation ................................11-16 • Maintenance ................................• Accessories ........................_ ......... • Warranty ..................................• Exploded View And Repair Parts List ......................... •...

  • Page 3

    Tool Use and Care • Maintain tools with care. Keep cutting tools sharp and clean. Propedy maintained tools, with sharp • Use clamps or other practical way to secure and cutting edges are less likely to bind and are easier to support the workpiece to a stable platform.

  • Page 4

    c. That wire size is large enough for AC ampere Important Safety Instructions For Charger rating of charger as specified below: • Save these instructions. This manual contains Cord Length (Feet) 100' important safety and operating instructions for battery charger part number 9_-11040 (981399-001). Cord Size (AWG) Following this rule will reduce the risk of electric Note: AWG = American Wire Gage...

  • Page 5

    WARNING: Some dust created by I_ower sanding, sawing, grinding, drilling, and other construction activities conta!ns chem ca s known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and •...

  • Page 6

    KNOWYOURHAMMERDRILL BIT STORAGE See Figure 1. When not in use, bits provided with your hammer drill can be placed in the storage area located on the top of the Before attempting to use your hammer drill, familiarize motor housing. yourself with all operating features and safety requirements, LEVEL To keep drill bit level during drilling operations, a level is...

  • Page 7

    TWO SPEED GEAR T RAIN ( HI-LO) LEVEL AUXILIARY WING SCREW HANDLE DEPTH STORAGE GAGE R OD AREA DIRECTION ROTATION SELECTOR (FORWARD/REVERSE) KEYLESS MODE CHUCK SELECTOR TORQUE TRIGGER ADJUSTMENT RING BATTERY PACK WRIST STRAP :_ SCREWDRIVER BITS Fig.1...

  • Page 8

    LED FUNCTION OF CHARGER YELLOWLIGHT"ON" AND RED LIGHTFLASHINGINDICATES DEFECTIVEBATTERYPACK CHARGER CHARGER RED LIGHT"ON" FASTCHARGINGMODE BATTERYPACKSHOWN GREENLIGHT"ON" INDICATESFULLY IN CHARGER CHARGEDANDSLOWCHARGING Fig. 2 TO MAINTAINBATTERYPACK CHARGER See Figure 3. Your charger has a "key hole" hanging feature for convenient, space saving storage. Screws should be installed so that center distances are 4-1/8 inches apart.

  • Page 9

    AUXILIARY HANDLE • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 13. See Figure 4. • Align raised ribs on battery pack with grooves on An auxiliary handle is packed with your drill for ease of bottom of drill, then attach battery pack to drill as operation and to help prevent loss of control.

  • Page 10

    REMOVING BITS INSTALLINGBITS See Figure See Figure 7. • Lock the switch trigger by placing the direction of • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 13. rotation selector in center position. See Figure 13. •...

  • Page 11

    If after one hour red light is still flashing, this indicates a WARNING: Always wear safety goggles or safety defective battery pack and should be replaced. glasses with side shields when operating tools. Failure to do so could result in objects being thrown Green light on indicates battery pack is fully charged into your eyes, resulting in possible serious injury.

  • Page 12

    SWITCH LOCK SWITCH See Figure 13. See Figure 11. The switch trigger can be locked in the OFF position. This To turn your drill ON, depress the switch trigger. To turn it feature can be used to prevent the possibility of accidental OFF, release the switch trigger.

  • Page 13

    TO DECREASE ADJUSTINGRING KEYLESS CHUCK TORQUE See Figure 14. A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws.

  • Page 14

    DRILLING APPLICATIONS See Figure 18. (Use only for the purposes listed below) END VIEW • Hammer drilling in concrete and masonry. LEVEL • Drilling in wood. • Drilling in ceramics, plastics, fiberglass, and lami- nates. • Drilling in both hard and soft metals. •...

  • Page 15

    WOOD DRILLING TO ADJUST DRILLING OR HAMMER MODE See Figure 19. • For maximum performance, use high speed steel bits To adjust drill to drilling or hammer operation, rotate mode for wood drilling. selector in the direction of arrows as shown in Figure 19. •...

  • Page 16

    Insert hex key wrench in chuck and tighten chuck CHUCK REMOVAL jaws securely. Tap sharply with a mallet in a counter- See Figures 20, 21, and22. clockwise direction. This will loosen chuck on the The chuck must be removed in order to use some spindle.

  • Page 17

    Do not abuse power tools. Abusive practices can damage WARNING: When servicing use only Identical tool as well as workpiece. Craftsman replacement parts. Use of any other pads may create a hazard or cause product damage. Only the parts shown on parts list, page 19, are intended to be repaired or replaced by the customer.

  • Page 18

    The following recommended accessories are currently available at Sears Retail Stores. • High Speed Bits..1/2 in. Max. 6-Pc. Extra Length Magnite Power Bit Set • Wood Boring Bits ..1-1/4 in. Max. • 30-Pc. Power Screwdriver/Nutdriver Set and Case • Masonry Bits..1/2 in.

  • Page 19

    DRILL MODEL NO. 315.271271 in all correspondence regarding your CRAFTSMAN 1/2 in., 18 VOLTS PROFESSIONAL CORDLESS The model number willbe found on a plate attached to the motor housing. Always mention the model number HAMMER DRILL or when ordering repair parts.

  • Page 20

    For repair of major brand appliances in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOME sM Anytime, day or n,ght (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anyt, me, d ay or mght...

Comments to this Manuals

Symbols: 0
Latest comments: