Page of 14

CRAFTSMAN 315.271490 Owner's Manual

318in. professional electric.
Hide thumbs
Owner's Manual
II::RRFTSMRN'I
318 in. PROFESSIONAL
ELECTRIC DRILL
Variable Speed / Reversible
Double Insulated
Model No.
315.271490
Save this manual for
future reference.
,A, CAUTION:
Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
Customer Help Line: 1-800-932-3188
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-551
8-98
• Safety
• Features
• Operation
• Maintenance
• Parts List

Advertising

   Related Manuals for CRAFTSMAN 315.271490

   Summary of Contents for CRAFTSMAN 315.271490

  • Page 1

    • Features all Safety Rules and Operating Instructions before first use of • Operation this product. • Maintenance • Parts List Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-551 8-98...

  • Page 2

    :..........I'L' :' ..... _11 Exploded View and Repair Parts List ............"..........Parts Ordering / Service ..........................FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL ELECTRIC DRILL I:RIIFTIMIIN If this Drill fails due to a defect in material or workmanship within one year from the date of pur- chase, Sears will repair it, free of charge.

  • Page 3

    The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The Instructions or warnings they give are not subsUtutes for proper accident prevention measures.

  • Page 4

    Keep hands away from bits. Do not reach under- • WHEN SERVICING USE ONLY IDENTICAL neath work while bit is rotating. Do not attempt to CRAFTSMAN REPLACEMENT PARTS. remove material while bit is rotating. • SAVE THESE INSTRUCTIONS.

  • Page 5

    Chuck Capacity 1/16 in. to 3/8 in. Input 4.0 Amperes Horsepower No load speed 0-2500 RPM Rating 120 volts, 60 Hz, AC only Net weight 3.875 Ibs. Your drill has been shipped completely assembled. ARNING" If any parts are missing, do not Inspect it carefully to make sure no breakage or operate this tool until the missing parts are damage has occurred during shipping.

  • Page 6

    REVERSIBLE WARNING: Always wear safety goggles or • safety glasses with side shields when operating Your drill has the feature of being reversible. The your drill. Failure to do so could result in dust, design of the switch will not permit changing the shavings, loose particles or foreign objects being direction of rotation while the drill is running.

  • Page 7

    ARNING: Your drill should never be UNLOCK CHUCKBODY connected to power supply when you are assembling parts, making adjustments, installing or removing drill bits, cleaning, or when not in use. Disconnecting your drill will prevent accidental starting that could cause serious personal injury.

  • Page 8

    TO INSTALL BITS VARIABLE SPEED See Figure 5. See Figure 6. DRILLBIT CHUCKJAWS CHUCKBODY CHUCKCOLLAR TO INCREASESPEED, RIGHT Fig. 6 PULLSWITCHTRIGGER • Unplug your drill. ARNING: Failure to unplug your drill could result in accidental starting causing serious injury. Fig. 5 •...

  • Page 9

    LUJ_l _lif_l _wj_ TO REMOVE BITS • Depress and release switch trigger to besure your, drill is in OFF position before connecting it to • Unplug your drill. power supply. • Check the direction of rotation lever for correct WARNING: Failure to unplug your drill could result in accidental starting causing setting (forward or reverse).

  • Page 10

    TOPVIEW • Open the chuck jaws and remove hexkey wrench. Remove the chuck screw by tuming it in a clockwise direction. See Figure 11. SCREWDRIVER Fig. 11 Note: The chuck screw has left hand threads. • Insert hex key wrench into chuck and tighten chuck jaws securely.

  • Page 11

    WARNING: When servicing, use only identical WARNING: Always wear safety goggles or safety glasses with sicle shields during power Craftsman replacement pads. Use of any other tool operation or when blowing dust. If operation part may create a hazard or cause product is dusty, also wear a dust mask.

  • Page 13

    CRAFTSMAN 318 in. PROFESSIONAL ELECTRIC DRILL MODEL NO. 315.271490 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your ELECTRIC DRILL or when ordering repair parts.

  • Page 14

    For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-Home s. (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 In Canada for all your service and parts needs call - 1-800-665-4455 Au Canada pour tout le service ou les pi_ces For the repair or replacement parts you need: Call 7 am - 7 pm, 7 days a week...

Comments to this Manuals

Symbols: 0
Latest comments: