How To Install The Wheels; Front Wheel; Rear Wheel - Craftsman 536.270280 Operator's Manual

SERVICE AND ADJUSTMENT
HOW TO INSTALL THE WHEELS
If the wheels must be removed for service, make sure they are
installed as follows.
Front Wheel
1. Make sure thevalve stem is to theoutsideof thetractor.Slide
the front wheel on the spindle (See Figure39).
2. Fasten the front wheel with washer and cotter pin. Bend the
ends of the cotter pin apart to keep the front wheel on the
spindle.
3. if your model has hub caps, install the hub caps. Make sure
the washers hold the hub caps in place.
Spindle
Front Wheel
Figure 39
Rear Wheel
1. Install the washers and spacer onto the axle as shown in
Figure 40.
2. Mount the square key in the key slot (See Figure 40).
3. Make sure the valve stem is to the outside of the tractor. Align
the slot in the rear wheel with the square key. Slide the rear
wheel on the axle.
4. Fasten the rear wheel with washer and e-ring.
5. if your model has hub caps, install the hub caps. Make sure
the washers hold the hub caps in place.
Rear Wheel ,, _ _, Square Key
Washer
Hub Cap
E Ring
Valve Stem
I Axle
Spacer /
!
Figure 40
_030614L 32