How To Install The Side Discharge Attachment - Craftsman 536.270280 Operator's Manual

OPERATION
HOW TO INSTALL THE SIDE DISCHARGE ATTACHMENT
_k WARNING: To prevent the engine from starting, dis-
connect the wire from the spark plug. Make sure the
attachment clutch is in the DISENGAGE position.
1. Remove the two wingnuts (see Figure 11).
2. Liftthe mulcher cover. Mount the side discharge attachment
onto the same bolts that secured the mulcher cover.
The mulcher cover lets you mulch the grass for a clean, fine cut.
To discharge the grass out the side, install the side discharge
attachment as follows.
3. Secure the side discharge attachment with the wingnuts.
4. To mulch, remove the side discharge attachment and mount
the mulcher cover to the mower housing with the wingnuts.
Mulcher Cover
Side Discharge Attachment
Wingnut
Figure 11
F 030614L 15