Install Rear Wheels; Fabric Top Grass Catchers; Assemble Grass Catcher; To Assemble And Attach Grass Catcher - Craftsman Lawn Mower Operator's Manual

Self-propelled rotary lawn mower
Table of Contents

Advertisement

INSTALL REAR WHEELS
"FABRIC
TOP" GRASS CATCHERS
("HIGH WHEEL" MOWERS ONLY)
Some high wheel models require washers
which will be provided in a parts bag, If
provided, install washers on the axle first
as shown,
+ Install one (1) rear wheel on the axle of
rear wheel adjuster_
, Install 3/8-16 locknut and tighten se+
curely.
,, Repeat procedure for other rear wheel,
Axle
tocknut
assembly
ASSEMBLE GRASS CATCHER
(REAR DISCHARGE MOWERS ONLY)
IMPORTANT: If your model lawn mower
is mulcher ready, the mutcher plate or plug
must be removed before using mower as
a bagger+To converl mower to bagging or
discharging, see the Operation section in
this manual,
Look at the different grass catcher illustra-
tions that follow, Determine which type
of grass catcher you have and follow the
appropriate instructions+,
\
Frame
handle
Frame
opening
TO ASSEMBLE AND ATTACH GRASS
CATCHER
• Put grass catcher frame into grass bag
with rigid part of bag on the bottom,,
° Slip vinyl bindings over frame+
NOTE: If vinyl bindings are too stiff, hold
them in warm water for a few minutes° if
bag gets wet, tet it dry before using+
= Lift the rear door on the mower housing,,
, For HINGE BRACKET mounted catcher,
place the grass catcher frame onto the
formed tabs on the rear door hinge
bracket.
"_'---_
Reardoor
Hinge bracket
Formed tabs
Grass
catcher
frame
° For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets,
Handte bracket
Rear
Grass
catcher
handle
\
Catcher frame sidehook

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents