Table of Contents
Advertisement
Page 54
I.
Insert the BLACK test lead p]ug into the BLACK "OTHER TESTS,'socket.
2.
Connect the BLACK clip to a clean connection on the engine block and
the GREEN cllp to a clean connection on the car body.
Scrape away
grease or paint, if necessary, to make a good metal-to-metal connection.
3.
Rotate Selector Switch to the POINTS LO VOLTS position.
4.
Start engine and operate at approximately 1200 RPM.
B.
Turn on headlights and note reading on the 0-3.2 Volt scale.
GOOD--A reading less than .i volt indicates a good ground strap and connections.
HIGH--A reading exceeding .I volt indicates a defective ground strap or
its connections. Clean the ground strap connections and repeat
test before replacing ground strap.
GREEN
BLACK
REDCLiP
USED
•tD
"L5
PJZ3 2
G OOD"I-"_E
-'_"
HIGH
GROUND
STRAP
TEST
(ENGINE
TO BODY)
FIGURE 52
Hide quick links:
Advertisement
Table of Contents
