Blowing Feature - Craftsman 113.179715 Owner's Manual

Operation (continued)
Blowing Feature
Your Vac features a blowing port. It can
blow sawdust and other debris. Follow
the steps below to use your Vac as a
blower.
Ak WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
WARNING: To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
A CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
A CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
Sears recommended accessories are
available at Sears retail stores and
www.sears.com. The Sears Blower
Nozzle Stock No. 16933 is recommended
for blowing debris.
Metal
andle
Hose End
Port
Handle
1. Locate blowing port of your Vac.
2. Insert the locking end of the
"Pos-I-Lock®" Premium hose into the
blowing port of the Vac. The hose
should snap into place. To remove the
hose from the Vac, press the release
button in the hose assembly and pull
the hose out of the Vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose, then place the
car nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
Car Nozzle
(Optional)
SwivelEnd
Of Hose
Extension
Wand(Optional)
11